Subscribe for a chance to win $500

Select Size

Out of Stock


First Gear Heated 65-Watt Jacket Liner

Item Code: FirstGearHeatedJLM65






  • Available in 90-watt and 65-watt versions
  • Designed to be plugged into a DC power source. Heat-trollers™ provide you with multiple ways to control the heat output in your heated gear.Exclusive dual-zone heating system allows you to use the single or the dual Heat-Troller™ without rewiring the liner. The liner is rated at 110 watts at 12.8 volts
  • Designed to be worn over a single layer of clothing like the TPG Basegear, a t-shirt or other lightweight garment. A protective outer jacket should always be worn over it
  • Built to be temperature neutral, so that you can wear your liner all day and not have to change clothing when you need heat
  • Lightweight soft nylon shell for minimum bulk, non-coated finish for maximum breathability
  • Form fitting, snug fit for optimum heat transfer to body
  • Heating pads on front, upper and lower back, sleeves and collar for full heat coverage
  • Integrated glove plugs and pants plug stow in their own zippered pockets when not in use
  • Flex panels and action back allow a full range of movement for any activity
  • Fleece inner collar to wick away moisture
  • Packs into its own included zippered pouch
  • 1-year limited warranty on liners–lifetime warranty on wiring

This FirstGear Heated Jacket Liner requires a heat troller (sold separately). You must purchase at minimum a single heat troller for this item. Gloves will attach to the liner with no additional troller required as long as you do not wish to set the gloves and jacket liner at different temperatures. Trollers can be mounted or not to the bike depending on troller purchased. A remote for heat control is also available. BMW riders will most likely have to purchase a converter for power. The power for these items comes directly from the bike which you must install. If preferred, you can purchase a portable battery pack with optional a/c adapter (case optional as well). Splitters may be purchased to connect an additional rider to the power source from the bike.

Size Chart

Please measure the circumference of your chest using a cloth tape measure and add 1" if the measurement is an odd number to get to the next even number and choose your size from the chart below.Please note all measurements are in inches.

Size Chart


Men's Chest Inches (cm)

Waist Inches (cm)

Sleeve Inches (cm)


37"-39" (94-99)

34" (86)

33" (85)


40"-42" (101-106)

35"-36" (89-91)

35" (89)


43"-45" (109-114)

37"-39" (94-99)

36" (91)


46"-49" (117-124)

40"-42" (101-107)

37" (94)


50"-53" (127-135)

43"-47" (109-119)

38" (97)


53"-57" (135-145)

48"-50" (122-127)

39" (99)

4 stars
3 stars
2 stars
1 star

Most Helpful Reviews :

Heated jacket

by - verified purchaser
This is a well built jacket liner that warms up quickly and stays warm. The temperature can be adjusted. Tested in zero degrees and works great! Don't let the price of heated gear scare you, they are worth every penny spend. Jafrum has a low price guarantee and I always shop at Jafrum for my motorcycle gear.

Was this review helpful?

Winter Riding

by - verified purchaser
If you ride year round this is a must. Don't forget to buy the heat troller.

Was this review helpful?

Heated jacket liner

by - verified purchaser
Great for winter riding. Like having a heated blanket wrapped around your body. I had to send first one back. It was a large and was too small and reordered an Xlarge. I would order one size larger due to the sizes tend to run a little smaller on First Gear.

Was this review helpful?


by - verified purchaser
I got the jacket liner with gloves works like a charm with the dual troller. Highly recommend getting the wireless troller.

Was this review helpful?

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
Do you have a XL size?
George K on Oct 27, 2014
Best Answer:The XL Jacket liner is no longer available. The Large is available if that helps.
Reply · Report · Justin PStaff on Oct 27, 2014