First Gear Heated 90-Watt Tall Jacket Liner Features
Available in 90-watt and 65-watt versions.
Designed to be plugged into a DC power source. Heat-trollers™ provide you with multiple ways to control the heat output in your heated gear.
Exclusive dual-zone heating system allows you to use the single or the dual Heat-Troller™ without rewiring the liner. The liner is rated at 110 watts at 12.8 volts.
Designed to be worn over a single layer of clothing like the TPG Basegear, a t-shirt or other lightweight garment.
A protective outer jacket should always be worn over it
Built to be temperature neutral, so that you can wear your liner all day and not have to change clothing when you need heat.
Lightweight soft nylon shell for minimum bulk, non-coated finish for maximum breathability.
Form fitting, snug fit for optimum heat transfer to body.
Heating pads on front, upper and lower back, sleeves and collar for full heat coverage.
Integrated glove plugs and pants plug stow in their own zippered pockets when not in use.
Flex panels and action back allow a full range of movement for any activity
Fleece inner collar to wick away moisture.
Packs into its own included zippered pouch.
1-year limited warranty on liners–lifetime warranty on wiring.
This FirstGear Heated Jacket Liner requires a heat troller (sold separately). You must purchase at minimum a single heat troller for this item.
Gloves will attach to the liner with no additional troller required as long as you do not wish to set the gloves and jacket liner at different temperatures.
Trollers can be mounted or not to the bike depending on troller purchased. A remote for heat control is also available.
BMW riders will most likely have to purchase a converter for power. The power for these items comes directly from the bike which you must install.
If preferred, you can purchase a portable battery pack with optional a/c adapter (case optional as well).
Splitters may be purchased to connect an additional rider to the power source from the bike.
Size Chart for the First Gear Heated 90-Watt Tall Jacket Liner
Please measure the circumference of your chest using a cloth tape measure and add 1"
if the measurement is an odd number to get to the next even number and choose your size from the chart below.Please note all measurements are in inches.
Men's Chest Inches (cm)
Waist Inches (cm)
Sleeve Inches (cm)
First Gear Heated 90-Watt Tall Jacket Liner Reviews:
Comment: I am 6'-2" and 175 lbs. Tall and thin. I was surprised to see tall sizes available at all . Even more suprized that they had it in stock. More yet that it fit perfectly and performed as advertised. Awesome product!, awesome price!, awesome service...
I'll be riding till it snows
Comment: Was shocked once I plugged it in. A pair of long johns on my legs and a pair of gerbing gloves attached to my sleeves. It's like riding with a warm blanket on. So far this year it's gone down to 26 degrees and I'm still toasty. I'll ride all winter as long as the snow stays away.
Ric Tangherlini / Singer-songwriter
First Gear Heated 90-Watt Tall Jacket Liner Review
Comment: Nice fit and comfortable!
Warm as toast
Comment: This liner makes it possible to ride all year long as long as it doesn't snow. Plug in my gloves to my ljacket liner and I'm warm as toast.
Ric Tangherlini - Singer/Songwriter
90 Watt Heated Jacket
Comment: Not only did this jacket keep me warm on the coldest of days , but was also affordable and comfortable and a plus is that You also get the thermostat controller with the Jacket , You don't have to purchase it seperately. The directions I feel could be better on where to plug everything into but its not hard to figure out and once You have You will appreciate having this jacket....