GPS And Mobile Cell Phone Holder For Motorcycles
List Price: 49.99
Sales Price: $14.95
About the <%=getCurrentAttribute('item','storedisplayname')%>
Note : Please remember to take your electronic device with you when you leave your vehicle.
Dimensions: 8.43"L x 3"H x 1.69"W
- 360 degrees rotatable and flexible
- Holds most mobile, GPS, PDA's, and MP4 devices
- Shock and slip resistant
- Angle adjustment lock button
- Convenient and easy to install on motorcycle mirrors
There are numerous options out there for mounting mobile devices to your motorcycle, but honestly, most of them are way more complicated than they need to be. One popular brand requires the purchase of four different part numbers to mount my particular phone to my particular motorcycle. That's a little much. Now, granted, these are model specific solutions, many of which are chrome plated, powder coated, or anodized steel and are backed by months of R&D. But, seriously, four part numbers? Just to put your phone on your bike?... and don't even get me started on the price. This GPS1 is inexpensive, universal, and easy to use. All you need are mirror mounts... If you have removed or relocated your mirrors to the bar ends, you will need to source a bolt with the same thread pitch as your mirrors... It is not recommended that you operate any devices other than your motorcycle while you ride. But, if you must, make sure to mount any accessories or controls you plan on interacting with on the left side of the bike. Even if you have cruise control, it's a lousy idea to remove the hand that controls the front brake from your handlebars... and seriously, if you plan on using this thing for texting, just throw yourself in a ditch now and get it over with... You can mount the holder stem two ways. For a standard mounting setup, the bracket will look like this... To bring your mobile device closer to you, turn the stem around and extend it as far as needed. Apply some medium duty threadlock to the last five or so threads on your bolt or mirror post... Do not over tighten! Remember, you are likely threading a strong steel bolt into a lightweight aluminum clutch perch. The thread lock will keep the bolt from vibrating loose. Now that you're mounted, you can secure your devise holder to the stem by inserting the tabs of the stem into the holes on the holder. Press down firmly until you feel the holder snap into place. The device holder can now be positioned vertically or horizontally by sliding this tab and rotating the holder. Next, press the button on the holder to extend the padded arms. These arms are adjustable to accommodate most types of mobile devices. For vertical applications, swing these two feet out at the bottom for extra support. Press this button on the side to release and extend the arms. Position the adjustable arms to best suite your device. Place your mobile device into the holder and squeeze the sides of the holder together. Make sure the arms of the holder aren't interfering with any of the buttons on the edges of your device by adjusting the position of the arms. To release your mobile device, squeeze gently on the sides of the arms and press the release button. Avoid pressing the release button without squeezing the arms together because the tab on the inside of the holder could wear out prematurely. Use the knurled dial on the back of the holder to adjust the pitch of your holder to your liking.