First Gear Heated Rider Leather Gloves are a perfect reason to go riding in the cold. As we all know, the first part of the body to get cold on most motorcycle riders is their hands. With the FIRSTGEAR Heated rider gloves you can go out and have fun even on those cooler days and keep warm and comfy while riding. These motorcycle gloves can be worn individually, which requires Heat-Troller (sold separately), or paired with your FIRSTGEAR Motorcycle Jacket Liner for the ultimate comfort on cold days.
DC heated, produces 15 watts of heat at 12.8 Volts (each glove) and should be used with a Firstgear Heat-Troller™ for optimum safety
Grade-A, top-grain, drum-dyed cowhide construction
Porelle® breathable, waterproof membrane
Pre-curved fingers and finger-mounted, rubber, faceshield wiper
Elastic wrist and adjustable hook-and-loop gauntlet closure
2-year limited warranty
This FirstGear Heated Glove requires a heat troller (sold separately) to use this item without the jacket liner.
Gloves will attach to the jacket liner with no additional troller required as long as you do not wish to set the jacket liner and gloves at different temperatures.
FirstGear DC Coax Plug Y-Harness is required for connecting heated gloves to a Heat-Troller™ without a heated jacket liner.
Trollers can be mounted or not to the bike depending on troller purchased. A remote for heat control is also available in heat troller packs.
BMW riders will most likely have to purchase a converter for power. The power for these items comes directly from the bike which you must install.
If preferred, you can purchase a portable battery pack with optional a/c adapter (case optional as well).
Splitters may be purchased to connect an additional rider to the power source from the bike.
Please measure the circumference of your hand starting at the top side of the base of your thumb (see image chart) using a
cloth tape measure and choose your size from the chart below.Please note all measurements are in inches.
Comment: Got these a couple weeks ago. I was impressed by how quickly they warm. And in 35-40 degree weather at 50-70mph, they kept my fingers from freezing. The back of the hand got a little too hot after slowing to 20-30 mph, required dialing down the controller. But what a great feeling to arrive to work after 45-60 minutes of riding, and BEING ABLE TO USE MY HANDS RIGHT AWAY!!!
Best Cold weather Riding Gloves
Comment: For those who ride in cold weather a lot, this is a must. What a big relief! I recommend buying one size larger.
Awesome Heated Gloves
Comment: Why didn't I order these the first winter I had my bike? Along with the jacket and the First Gear Heat Troller, I am toasty warm. Can't wait to see how low the temperature goes before it's finally too cold to ride!
At my desk in Hollister, MO
FirstGear Heated Gloves
Comment: My first pair of heated gloves and I got a great deal. They are warm and connect to a heated jacket easiy. They run true to size.
First Gear Heated Gloves
Comment: Got these with the jacket, they really make riding in the cold much easier, much more pleasant.
Awesome Heated Gloves
Comment: Once again awesome. A little hard to get used to the thickness, I keep blowing my horn when trying to use my blinkers. I finally got used to it. Again, hands never got cold!!!!
He loves them!!
Comment: I purchased the heated gloves along with the Y-harness and troller for my dad for Christmas. He's already used them and has absolutely no complaints. They fit true-to-size and seem to be top-quality.
First Gear Heated Gloves
Comment: Great product.They work really good
Comment: It's worth getting everything, I got the First Gear Heat Gloves, First Gear Heated Pant Liner, First Gear Heated 90 Watt Jacket Liner, Fist Gear Heated Socks and a Dual Remote Control Heat Troller Kit. Pricy but very comfortable. So Far I drove in 37 degree weather and windy. Well worth the investment.
Best Answer:The heat is on the top of the hand, so the thumb does get warm, but is not fully heated. Just like the fingers are not fully heated, just the top of the hand. I have ridden in 21° weather and my hands were comfortable. No more struggling to get my frozen fingers onto the head to thaw out!! Go for it.
I honestly can't remember, but these glove work great! Usually my hands are so warm I wind up sweating a bit. Usually that would be a problem, but because of the continuous heat it's not. Hope this helps.
Firstgear offers four different styles of heated gloves; the Heated Carbon
Glove, the Heated Rider Glove, the Women's Passenger Glove, and the Heated Glove
Liner. In this video we are taking a look at the Heated Rider Glove. The heated
rider glove is available in Men's and ladies sizes. The men's version is
available in sizes sm -2xl and the ladies version is available in sizes sm-lg.
They are constructed from top grain cowhide leather and feature an Aqrotex
breathable, waterproof membrane. The liner is made of Thinsulate and the fingers
are precurved making these true motorcycling gloves. There is a large flex panel
in the carpal area and adjustable Velcro straps on the wrist and underside of
the gauntlet. The left thumb features a strip of rubber that is used to clear
your helmet faceshield.
Connecting your First Gear Heated items is easy, but there are numerous
different types of controller options available. To see all of the different
Heat-Troller options, check out our video showing many of the ways to set up and
control your new Firstgear heated gear.
Now that you have selected the type of Heat-Troller that best suits your needs,
you can go ahead and connect your gloves. If you are using a pair of gloves or
glove liners in conjunction with the heated jacket, simply plug the female glove
lead into the male lead coming out of the sleeve of the jacket. If you are using
a pair of gloves by themselves, you will need to purchase a DC Coax Plug
Y-Harness, and the Heat-Troller of your choice, which will come with the DC Coax
Battery Harness. Hold the split ends of the y-harness in your hands when you put
your jacket on and you'll be wired up. Plug the gloves into the y-harness and
then the y-harness into the Firstgear Heat-Troller. Once you have started your
motorcycle, you can turn on the Heat-Troller and adjust the setting to your