In Stock

Details

Throw-Over Motorcycle Saddlebags SD4080 Studs.



This motorcycle saddlebag features universal fitting along with UV protection. The bag will not turn white in extreme heat.



Dimensions: 14" x 7.25" x 13.25"



Throw Over Motorcycle Saddlebags SD4080 Studs Features



  • Zip off bag with heavy duty Velcro Cover and Lock
  • Universal Fitting
  • Includes a Hard Sheet Inside the box with 4 Pockets
  • Heavy Duty Quick Release
  • 100% Waterproof
  • 4 Tie-Down ribbons on each side for Extra Security Fit
  • UV Protected and will Not Turn white in Extreme Heat
  • Bag Holds its Shape
  • No Studs
  • Shipping weight 23 pounds
  • Not a cooler bag. Not intended to use with water & ice




Throw-Over Motorcycle Saddlebags Sizing Instructions

Measure distance horizontally from the edge of the rear turn signal to where the passenger would be aligned on the seat. Next ,measure the distance vertically from the exhaust pipe to approximately two inches below the top of the rear fender. *Please remember to allow at least one inch clearance between the bottom of the saddlebag and the exhaust pipe. This will prevent the saddlebag from being damaged by touching the exhaust pipe.



Throw-Over Motorcycle Saddlebags Mounting Instructions

Generally, to install throw-over saddlebags to your bike, you would need to remove the passenger seat. You would then ensure that the hook and loop connectors are firmly pressed together and secure bonding the two bags. To ensure additional stability, use the strap at the top of one saddlebag and thread through the double d-ring on the other saddlebag. Place the saddlebags on the top of your bike and adjust to how you want the bags to sit. After this is complete, re-install your passenger seat back on the bike. There are additional straps on the bottom of the saddlebags for added security and stability as well.

Be the first to write a review