The Tourist open face helmet is packed full of features and accessories making it an excellent choice no matter what the season. From spring to summer to fall this helmet has got you covered. Each Tourist motorcycle helmet comes configured with a clear shield and painted removable clip-in jaw piece
Included in the box is an extra dark tint shield and peak for use without the shields or removable jaw
Soft fleece bags included for the helmet, extra dark tint shield and peak protect your investments when they are not being used
Shields and peak are changed quickly and easily due to their tool-less design
Removable jaw includes 1 piece breath-box/chin curtain for use when the weather gets cold or rainy
Large eye port for improved range of vision
Removable/washable Coolmax comfort liner and cheek pads move the moisture away from your head and the fabric dries quickly
The added performance keeps you dry and comfortable
Deluxe oversize ear pockets for better fit and comfort with integrated speaker pockets for communications systems
Soft padded chin strap
Size Chart for the Fly Tourist Helmet
Helmet Sizing Information.To achieve proper helmet fitment, begin by finding your head circumference size using the method described below. Remember that the helmet sizing you choose should fit around the crown of your head comfortably with no pressure points. The cheekpads should fit firmly around your face. Once your chin strap is fastened, grab the chin bar of the helmet and move it side to side. Your cheeks should move with the helmet, which should not slide across your face. Different thickness cheekpads can be purchased to obtain the perfect fit.
Head Measurement Instructions.Wrap flexible tape measure around your head approximately on inch above eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size in the chart below.
The Fly Tourist is DOT approved and features a thermoplastic poly alloy
shell. It’s available in sizes XS – XXL and there’s a size chart on the listing
to help establish your fit. Unfortunately, I found it to be just a little off.
The helmet is very round
in shape, so I would typically go up a size and add thicker cheek pads to
accommodate my long oval head shape. My 23 ½ inch head should fit in a large
according to the chart. So, I would typically go up to an XL for comfort, but
I’m nowhere near fitting into this large. I would have to go up at least two
sizes. Riders with very round heads should have no problem going up one size,
The Fly Tourist is recognized all over the
motorcycle community as being one of the best values around. There are
other, very similar helmets on the market. But, this Tourist has some added
features that are definitely tough to beat. This helmet falls into the popular
hybrid category, meaning it has features from more than one style of helmet.
This helmet, as it sits, offers much of the air management, and some of the
debris protection of a full face helmet. For the higher airflow of a three
quarter, or open face helmet, you can simply remove this chin bar using these
When riding without the chinbar, install these included plugs into the shell to
quiet some of the wind noise. You can also replace the faceshield with a peak
visor for a completely unobstructed riding experience. On sunny days, you can
replace the clear faceshield with a smoke version. Removing the face shield is
really simple. First, lift the faceshield all the way to the most raised
position. Then, depress this small button and slide this lever to the down
position. The shield will practically come off of the side plate by itself.
Repeat the process for the other side of the helmet. To reinstall the shield,
Line up the tabs on the shield and base plate and press firmly on the shield
while sliding the lever back into the up position until it clicks. The same
process is used for installing and/or removing the peak visor.
What makes this helmet such a fantastic value, is that all of these extra
accessories are included. There is nothing extra to buy. These added features
are also a little bit nicer than some from competitors. For example, the chinbar
included with the Tourist is painted to match the rest of the helmet, where the
chin bar for a similar helmet from another brand is purchased separately and is
available in unfinished black only. This chin bar feature is also the mounting
platform for the included breath box and chin curtain. To add the breath box,
you remove this screw in the center of the chinbar and slide the breath box
behind this padding. Line up the center holes and replace the screw. You are now
ready for some serious cold weather riding. If, even with the breath box
installed, you are still experiencing issues with fog, Fly offers anti fog
coated versions of both the clear and smoke face shields. They even offer dual
pane shields for extreme conditions.
The next feature I want to take a look at is the ventilation. There is no room
for shield fog venting in the chin bar, it isn’t tall enough. So, if you ride in
damp weather, but it’s too warm for the breath box, you will want to upgrade to
the fog free shield.
The shell has excellent ventilation, though, with three position vents on the
front and on the rear, with additional exhaust ports here, here, and here.
The liner is also very good. It is removable and washable with Coolmax material
to wick the moisture off of your head so that the ventilation can remove it from
the helmet. The liner pieces are standard snap type, and remove with a simple
tug. The cheek pads have extra-large ear holes, and feature pockets for easy
installation of a Bluetooth communication device.