In Stock - Usually Ships Same Business Day

Details

Saddlemen Desperado with Shock Cutaway Saddlebags.



Dimensions: 17.5"L x 12.5"D x 6.5"W



Saddlemen Desperado Saddlebag Features



Desperado Saddlebags with Shock Cutaway



Saddlemen Express™ Desperado Shock-Cutaway Saddlebags. Slant style bags designed to fit around shock absorbers. Built with shocks in mind, eliminating the need for turn signal relocation andeliminating unneccesary width to the bike through better fit. Works with most twin external shock layouts.



  • Also fits most machines with hidden shocks
  • Contoured back panel allows fitment directly over shocks
  • Several installation options: yoke included for over-the-fender mounting; hard-mount with saddlebag supports (sold seperately); or mount with one of Saddlemen's Quick Disconnect Mounting Kits (sold separately) for fast and easy mounting and removal
  • Desperado styling features straps and chrome buckles and studs, along with hidden quick-detach locking buckles
  • Large internal mesh pockets for maps, etc.
  • Hat box lid improves weather resistance
  • Rigid construction maintains saddlebag shape
  • Carrying handle included
  • Size optimized for most bikes with external shocks


Saddlemen Desperado Saddlebag Sizing:





Saddlemen Desperado Saddlebag Installation Instructions



1. Saddlemen Express saddlebags mount over the back seat or rear fender of most motorcycles, with one saddlebag on each side of the motorcycle and the mounting yoke resting on the fender or seat. Both saddlebags must be securely mounted and tied down in a manner that does not interfere with any part of the motorcycle’s operation, including turn signals, tail or brake lights, or the suspension or drive train.
 
2. We HIGHLY RECOMMEND that your bike is equipped with saddlebag supports (Saddlemen’s S4 supports, Fig. A, available at your dealer, or comparable supports). If saddlebag supports are not available for your bike, use Saddlemen Saddlebag Tie Down Kit, or comparable, to connect the two loops located at the ends of each saddlebag bottom to your bike’s frame.
 
 
3. Your saddlebags must be at least two inches clear of any exhaust pipe, while stationary and moving. For height adjustment of the bags, separate the two yoke halves and reposition them. Adjust the yoke shorter for higher saddlebags, and vice versa. See Fig. B. When you have the yoke in the correct position, tighten the nylon safety strap using the adjustable D-rings (Fig. C) on the top of the yoke.
 
4. Saddlebags are adjustable towards the front/rear of the bike for clearing turn signals and shock absorbers. See Figs. D and E for options.
 
-Turn yoke around 180 degrees;
 
-Position twist locks towards the front or rear of bags (use the included plug to fill the fourth, unused hole)
 
-Place two yoke halves together at an angle to adjust bag position
  
NOTE: If you feel the yoke length is excessive on your bike, you can cut each yoke end as long as you allow enough hook-and-loop to secure them.
 
5. When you’ve placed the bag on your bike in the proper position, use the strap located on the bottom of each bag (Fig. F) to connect the bag to the saddlebag support. These lower straps are length-adjustable; wrap them around the support, buckle the ends together, then adjust the length so that straps are tight and they are supporting some of the saddlebags’ weight. (Fig.G)
 
6. QUICK RELEASE FEATURE The backside of each saddlebag has four mounting holes, and each side of the mounting yoke has three twist locks. Align the twist locks in a vertical position, and insert them into the back of the saddlebag. Then, turn the twist locks into the horizontal locked position before riding (Fig. E). The mounting strap located on the bottom of each bag has two quick-release buckles; one of them allows you to leave the strap on the bike and still take the bag with you. Make sure both are secured before riding.
 
 
NOTE: Saddlebags must not move around; if they do, you must tie them securely to your saddlebag supports using a Tie Down Kit (recommended), or cable ties, connected to the two attachment points at the bottom corners of each saddlebag.
 
NOTE: DO NOT connect any straps to flexible or moving parts (rubber mounted turn signals, swing arm, shocks)
 
NOTE: You must tuck away, tie, or cut/shorten all loose mounting straps BEFORE you ride the motorcycle. See warning information above.
 
NOTE: Check saddlebag mounting and strap tightness each time you stop

Be the first to write a review