Solid hard looking bags with a great look at a nice price. Got the matching tool and back bag too.
Saddlemen Drifter Slant Saddlebags Custom Fit.
The Saddlemen Drifter Slant Saddlebags Custom feature a flat back for easy custom installation. They also come without a yoke and with a strong, smooth back so that you can custom mount them to your bike. This mounting does require drilling, and it is also recommended that you use Saddlebag support brackets. The Drifter Slant bags come in two different sizes – large, which measure 15.5”L x 9.5”H x 5”D and the jumbo, which measures 17.5”L x 10.5”H x 6”D. These are durable bags that are built on a sturdy plastic frame and are constructed out of a variety of materials, including leather and marine-grade vinyl. They are also good-looking bags that have genuine leather straps and chrome buckles that conceal easy-to-open, quick-release buckles underneath.
Large : 15-1/2"L x 9-1/2"H x 5"D
Jumbo : 17-1/2"L x 10-1/2"H x 6"D
Saddlemen Drifter Slant Saddlebag Features
- Custom-Fit bags have strong, smooth back side and no yoke; designed to allow custom mounting to your motorcycle (drilling required).
- Saddlebag support brackets recommended.
- Flat back for easy custom installation.
- Made of a durable combination of materials, including genuine leather, marine-grade vinyl,chrome-plated brass and a tough plastic frame.
- Features chrome buckles and genuine leather straps with lockable, quick-release hidden buckles.
- Carry handle included.
Saddlemen Drifter Slant Saddlebag Sizing:
Saddlemen Drifter Slant Saddlebag Installation Instructions
Recommended Additional Hardware
|Saddlemen’s S4 Quick-Disconnect Saddlebag Mounting Kits are the perfect way to install these saddlebags on your bike. Available for most popular metric cruiser and Harley-Davidson models, our kits feature hard-mount installation with the ability to remove the bags in seconds to carry them with you or to wash your bike. Saddlemen has everything you need, including saddlebag support brackets, turn signal relocators for getting larger bags onto some bikes, and quick-disconnect mounting kits.|
|1. It is anticipated that the smooth back side of the bags will be drilled to facilitate mounting, and that you will fabricate mounting brackets, spacers or supports. Mounting bolts with then pass thru the bags and, using the supplied fender washers, be secured to either your fabricated brackets, fender or fender struts. Most installations utilize the fender struts and their fender mounting locations for connecting the saddlebags to the motorcycle. Other locations can also include turn signal or top shock mounting points. Mount points should be as far apart as possible and use the fender washers supplied to provide a stable mount base and spread the mounting load and stress over the largest area possible. The bags can also be mounted utilizing aftermarket saddlebag support brackets and securely attaching the saddlebags to these brackets.|
|2. The saddlebags must be securely mounted to the motorcycle so that they can support any load that you intend to carry (less than 10 pounds per side) and so the bags clear all moving or suspension components thru the full suspension travel, even when the bags are fully loaded. Be expecially careful that the cantilevered bottom inside edge of the bag, and all other surfaces, clear all components such as shocks, swingarm, brake calipers, brake rods and lines, chain guard, etc. after installation.|
|3. Inspect the bags immediately after first use to determine that the bags are not interfereing with moving components. Inspect weekly thereafter to be certain that the bags are not contacting moving parts and that the bags are not developing cracks as a result of inadequate mounting support.|
|4. If the installed bags obstruct the original factory supplied side reflectors, please contact Saddlemen to purchase self-adhesive reflectors, which must be installed where they are clearly visible from the side of the motorcycle.|