I looked around for some bags I was sure that would fit my ACE with the Stock pipes and these barley cleared it. The previous bags actually rested on the pipe but it had flashing so it did not matter. They look very nice on the bike , They seem to be very sturdy and very well made. The Lock that locks the harness to the bags are a bit hard to thread while they are on the bike, but thats fine. I only wish they were a bit deeper, but I have a luggage rack anyway, so whatever. That was my fault. I would recommend them on an aesthetic basis for sure, but if you tour you definatly would want something deeper and wider.
Two Tone Braided Motorcycle Saddlebags.
The Two Tone Braided Motorcycle Saddlebags will keep all of your gear safe and protected from the elements. This is a very handsome black bag with gray trim that is accented with studs. Although this item looks like it has been crafted from real leather, it is actually made from even more durable PVC. And because this well-made bag is waterproof and has rain flaps, you can trust that it will keep your valuables safe and dry. Everything about this item has been well-thought out, from the handles that stay hidden until you need them to the four inside pockets to keep your smaller items organized. Need to take your bags with you? Just zip them off, and you’re ready to be on your way.
Dimensions: 14"L x 10.5"H x 6"W
Two Tone Braided Motorcycle Saddlebags Features
- Raised Studs
- Lock & Key Compatible
- Zip-off Bags for easy removal
- Hidden Handles for easy carrying
- 100% Waterproof with Rain Flap with Snaps
- Quick Release under Straps/Buckle
- Universal Throw-over attachment
- Two tie-downs on each bag
- Hard Sheet inside to hold its shape
- 4 inside pockets
- Chrome plated Nickel hardware
- Heat Protection on the bottom
- Could be used as Throw Over or can be mounted(using mounting brackets)
Two Tone Braided Motorcycle Saddlebags Mounting Instructions
Measure distance horizontally from the edge of the rear turn signal to where the passenger would be aligned on the seat. Next, measure the distance vertically from the exhaust pipe to approximately two inches below the top of the rear fender.
*Please remember to allow at least one inch clearance between the bottom of the saddlebag and the exhaust pipe. This will prevent the saddlebag from being damaged by touching the exhaust pipe.
Generally, to install throw-over saddlebags to your bike, you would need to remove the passenger seat. You would then ensure that the hook and loop connectors are firmly pressed together and secure bonding the two bags. To ensure additional stability, use the strap at the top of one saddlebag and thread through the double d-ring on the other saddlebag. Place the saddlebags on the top of your bike and adjust to how you want the bags to sit. After this is complete, re-install your passenger seat back on the bike. There are additional straps on the bottom of the saddlebags for added security and stability as well.
Most Helpful Reviews :
Was very impressed with how fast the product was shipped, made it to the front door the very next day. Quality of these bags are great, wasnt sure how well these bags would fit on my v-star 250 but it went on without any problems and have no complaints, deffinately cant beat the price. Highly recommend this place to future customers.
Got my bags in record time. Best value around for the price. Fit my Raider just right. Had to modify my bag supports with the help of a friend but they look really excellent. Would recommend this site to all my friends. Thanks Jarfrum for an excellent product for the price. A very satisfied new customer.
These bags were better than expected and I'm very happy with them on my Yamaha Virago 750. The picture really doesn't do them justice. They accent the bike very well and the slanted style looks custom. There is enough room for me to keep items such as rain wear, bike cover, gloves, hats and a spare shirt. I would very much recommend these bags.
Probabely my fault for ordering Friday evening of a long weekend. My bags came the following Saturday and I could not be happier with them. They look great on my kawi 500. First ride out had someone ask about them. I highly recommend Jafrum.
Very pleased with the saddlebags. They look good, and they've kept things dry. Didn't even have to install supports because of the hard backs on the bags. I've had a number of good comments on how they dressed up my Virago.
Great looking, great quality, great value. Easy to install.
This is my second set of saddle bags I have gotten from Jafrum. The other set lasted 10 years, and was still in decent shape but I just wanted a new look. These bags are awesome.
Have a 04 Dyna wide they were a little tight but it actually made the fit better. Extremely happy with this product. Had originally found same product on another site for almost twice the price. Love the look.
These are great bags. Look good on the bike. Very well made.
Very fast shipping. Ordered them Thursday night, received them Saturday morning. They are very well made and look very nice.
I love these bag. Have them on my Honda 600. The service was exceptionally fast. Quality, price and overall looks makes them a superb value.
I am very happy with my new bags and they look great on my turquoise and silver bike. Thank you for your add being right on.
Very pleased with these bags and the quick delivery by Jafrum. They look great on my Stryker. Many features like the ability to lock the belt clip. The ability to zip them off and carry them. Absolutetly love these bags. Today i ordered the brackets and got a great deal on those as well. Thanks Jafrum
Love these. They're simple classic bags look great on my dyna. They hold allot more then you would think!
It's difficult to purchase things such as this online at times because all too often I've received a product of lower quality than anticipated. Not the case this time! I was more than pleased with these saddlebags!!!! They are extremely high quality and the colors are perfect! I couldn't be happier with them!
I placed my order from the parking lot at work at 3:30 pm. The next morning at 9:00am FedEx delivered my saddle bags. Excellent!! The bags were exactly as advertised and I am very impressed.
"they look good on my 950 v-star had to make some adjustments to mount them. one of the bags had two rivets missing on the back. I used two small bolts to keep the back panel in place."
When I received my bags I was suprised! For $70 you cannot do any better. Looks and feels like they should cost alot more. I am extremely happy with this purchase. I did not have to relocated the turn signals either. Thank you!
I can't believe how nice these bags are for the price. They are very sturdy, hold there shape, easy to install, and seem to keep the rain out. No reason to shop anywhere else for sadlebags, Jafrum is #1
These medium sized saddlebags are made of a durable, leather-like PVC material, are black with gray trim, and are highlighted by chrome plated nickel studs and decorative braiding. Each bag is slanted and measures 14 inches x 10.5 inches x 6 inches, making them perfect for medium to large cruisers. The slanted design works great on machines with limited luggage space due to turn signal location or externally mounted shock systems. These bags have a waterproof design, although they do not come with covers, so if you're putting valuable items or electronics in your luggage, it's always a good idea to use waterproof liners or covers with taped seams in addition to the bags themselves. These bags are throw-over in design so mounting is easy. Once you have your saddlebag supports installed, you simply remove the bike's passenger or one piece seat, lay the bags over the rear fender, adjust the yoke to get perfect bag placement, and replace the seat. These cords here on the perimeter are perfect for tying to the brackets to stabilize the bags. These bags are easily removed by simply exposing the zippers and zipping off the bags. For a light theft deterrent, grommets have been added to allow the flaps to be secured with one of the included locks. It's probably a good idea to use these locks only while parked, to make sure they don't scratch your paint while you're bumping down the road. These bags also have a very rigid panel on the backside. So, if you want to eliminate the yoke and mount these bags permanently you can, although this would be a completely custom install so no directions are available for the installation process. I like the carry handle design on the 4059's. They've have moved the handle away from the middle of the lid to the inside edge, which cleans up the look of the bag and allows the rider to carry both bags with one hand. They've even added these little flaps to protect the bag from its own hardware. The bottoms of the bags feature a heat resistant panel that works incredibly well to protect your saddlebags and their contents. Remember, though, you still want to keep a minimum of about an inch of space between the exhaust and the bag, especially if you have an aftermarket exhaust. Most aftermarket pipes come with far less heat shielding than OEM exhaust systems and even though your bags may stay intact, you can still damage your bag's contents. The SD4059 Saddlebags feature lockable, quick release buckles hidden beneath classic style metal buckles. Opening the bag reveals the snap down element barrier, and beneath it you can see the two low profile perimeter pockets and the rigid corrugated construction.