I purchased the Orange version of the SS2500 Hell and Back helmet. Jafrum offered the best price I could find, and shipping was free and fast. I had the opportunity to try on the SS2500 at a cycle show, so knew in advance that I would need an XL, compared to my usual size L when wearing HJC helmets. I advise you check their fitment chart prior to ordering. The helmet quality is quite good, finish is excellent. The liner is plush, but the ear space is a little tighter than some, so if you use a headset with speakers you may find it cramped. Airflow is good but not great, as the top vents are small and may be partially blocked by the visor (beak) Being a dual sport helmet, the front is more open than a typical full face, so you do get quite good flow in the front. The visor does a great job of blocking the sun, and while it does catch air at speed, it is manageable. Wind noise is higher than my previous helmet, as the SS2500, like most DS helmets, does not have a chin curtain or full neck roll to block wind noise. Overall, a great looking helmet that I would recommend to friends.
Speed and Strength SS2500 Helmet
List Price: $199.95
Sale Price: $137.99
You save: $62 (31%)
Speed and Strength SS2500 Helmet.
The Speed and Strength™ SS2500 dual sport full face helmet is lined with a removable, washable Cool-Core® moisture wicking liner and built with a T.F.C™ Tri-composite fiberglass shell that meets or exceeds DOT and ECE 22-05 standards. The 1600 gram motorcycle helmet contains an Air Strike™ direct course ventilation system for proper airflow circulation throughout the helmet. Provided with each full face is an All Clear!™ optically correct, anti-scratch, anti-fog and UV resistant face shield. Tinted shields are sold separately and are for daytime use only.
Speed and Strength SS2500 Helmet Features
- Tri-composite fiberglass shell
- Meets or exceeds DOT and ECE 22-05 standards
- ''Cool Core®'' removable, washable and moisture wicking liner
- ''AirStrike™'' direct course ventilation system
- "ALL CLEAR! Sight System™'' optically correct, anti-scratch, anti-fog and UV resistant faceshield
- "Speed Strap™" quick release chin strap
*Note : Helmet comes with clear shield. Tinted shields (shown) sold seperately
Speed and Strength SS2500 Helmet Sizing
How to Measure a proper helmet
SIZING:To measure your head size, wrap a tape measure horizontally around your forehead. Select the helmet that is the closest fit to that size. A helmet should fit snug on your head. If it moves while wearing, it is too large. If it is painful to wear, it is too small. For proper sizing, your nearest dealer will be able to help you get sized up.
FITTING: Open the chin straps and slide the helmet onto your head starting at the forehead. A helmet should feel snug. If it slides on easily it is too big. It should feel tight to pull down. Make sure the inner padding fits snug all around. You should feel the padding pressing against your cheeks and head. The last check for a proper fit is to test if it moves while wearing, there should be no movement if you shake your head. Place your hands on the helmet and move it front to back and side-to-side. If there is a lot of movement, try a size down.
|HELMET SIZE||HAT SIZE||HEAD MEASUREMENT|
|XS||6 1/2" - 6 5/8"||20 7/8" - 21 1/4"|
|SM||6 3/4" - 6 7/8"||21 5/8 - 22"|
|MD||7" - 7 1/8"||22 1/2" - 22 7/8"|
|LG||7 1/4" - 7 3/8"||23 1/4" - 23 5/8"|
|XL||7 1/2" 7 5/8"||24" - 24 3/8"|
|2XL||7 3/4" - 7 7/8"||24 3/4" - 25 1/4"|
Most Helpful Reviews :
Helmets nice for the price. Light but you'll probably have to order a size larger than you normally wear. This is a snug fitting helmet.
The SS2500 is Speed and Strength's hybrid helmet and can be used for both on and off-road riding.
For less than two hundred dollars, you get a helmet that is both DOT and ECE approved and has some great features. The SS2500 has a Tri-composite Fiberglass Shell that is lightweight, strong, and uncommon in this price point. The helmet I have here is a large and weighs in at about three and a half pounds.
There are different dual sport helmets from different brands that are focused on different types of riding. This hybrid is definitely targeted more toward street riding. One of the ways that you can easily identify the main purpose of one of these hybrid style helmets is by looking at the aerodynamics. The large openings on the peak visor allow a lot of air to pass through. This is an important feature for a helmet that is going to be used at higher highway speeds. The peak visor on the front can be removed using the aluminum screws on the side. Another way to assess the main purpose of a hybrid helmet is by examining the shield. You can easily tell whether a helmet is designed more with face shield use in mind, as opposed to goggles. The Speed and Strength's All Clear Sight System Optically correct, anti-scratch, anti-fog, and UV resistant face shield is very sophisticated. They wanted to capture the look and functionality of the off-road shape but still wanted to retain optical correctness to maintain a distortion-free view for higher speed riding. The flared bottom edge of the face shield, allows the shield to retain a flatter shape, which improves image integrity. Goggle strap real estate is a little limited on the SS2500 but they make up for it by adding a ridge along the back of the helmet to help keep your goggles in place. The shield can also be removed completely giving you a lot of versatility with this helmet.
The venting on this helmet is very clever. The chin bar has a vent that is operated with a switch from the inside which keeps the front looking clean. This vent flows air to the mouth as well as the face shield to help manage fog. The top has two chimney vents that promote pass through ventilation. One cool feature I discovered on this helmet is that if you start to get overheated, you can open the visor and tilt your head back a little bit (depending on your riding position, of course) and the shield will actually help guide a little extra air into the chimneys. The vents are easy to operate while wearing gloves and the large cutouts in the visor almost guide you to the location of the switches.
The liner of this SS2500 is my favorite part of this helmet. The Cool Core moisture wicking liner is removable and washable like on so many helmets nowadays; but, what I think they nailed is the actual feel of this liner material. You really have to wear this helmet to fully appreciate it. The feel reminds me of material you might find in some high end athletic undergarments. Almost like it was designed to be worn on a pwc or while operating an offshore race boat. This liner will be able to handle any sweat, water, dirt, or mud you may throw at it. The liner is easily removed and is designed more for simplicity and breathability rather than a quiet ride so despite this helmet's street focus, it does not have a neck roll. The cheek pads just snap in. You can get a better look at this material as I take them out. The headliner is pretty standard Speed and Strength in its design. You have two snaps in the back and the snapless hook and loop style attachment in the front.
This helmet is also fitted with the Speed Strap quick release chin strap. This system allows for fast, easy connection with or without gloves on.